How do I put my Gimp Avatars on the site?

Hi! Welcome to the Feedback forum.
Before reading anything or asking anything; please check out the FAQs. Your question might be in there. However if you want a better understanding after reading the FAQs, like if it didn't explain it good enough, then by all means ask your question.

Please read the following before posting in this forum...

In this forum you will see an Announcement, and several "sticky" topics. The announcement is the Universal Board Rules. If you are new, read this before doing anything else! The sticky topics will stay above and separated from normal user-made topics in the forum. This is because they outline important information about the board. If you see a sticky topic concerning your issue, please reply with your question or concern in the correct topic. Moderators will see your reply within these topics. Before asking your question, be sure to read the topic and its first page especially. It contains information about your issue that is valuable and may even answer your questions. If the topic does not answer your question, ask your question within the topic, not the forum. If no sticky topic concerns your issue, then you are welcome to ask your own questions by creating a new topic within the forum.

Thank you for keeping the Board Help forum organized!

How do I put my Gimp Avatars on the site?

Postby Arani » January 1st, 2011, 12:16 pm

Just like the title said, I don't know how to put one of my Gimp avatars onto this site like everyone else does and have it stay at the correct avatar size but be big enough for ppl to see. 0_o' Help???
Arani

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 4029
Joined: June 30th, 2010, 8:39 am
Pride Points: 56

Re: How do I put my Gimp Avatars on the site?

Postby xLilacVixenx » January 1st, 2011, 12:45 pm

Well first you need to learn how to crop and resize the image to a close enough image for the website.

First, begin with your image and select the button on the left that has something that looks like a knife. Select the start of your image and crop around it to make it go through the head and shoulders. Then you go to Image > Scale and type in the size you want and it should resize it. If it seems too small, look at the bottom of the screen where there's a bar and there should be a drop-down menu and you select "100 %".

Next you just add the effects you want and upload it to a hosting website like Tinypic.com , Imageshack.com , or Photobucket.com. (I recommend Tinypic since you can already resize it when you upload it anyways, it doesn't delete you images sometime, and you don't need to make an account.)

That's the best I know; sorry if you can't understand it that well. I'm not too good at explaining and I don't even have the editor out so I'm doing it by memory. :innocent:
Image
'Cause you're beautiful. Like no other. Flawless, absolutely flawless.
<3
xLilacVixenx
ƒℓυттєяsнγ ƒαиαтìc

User avatar

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 2327
Joined: October 16th, 2010, 7:24 am
Gender: Female
Pride Points: 13

Re: How do I put my Gimp Avatars on the site?

Postby Arani » January 1st, 2011, 1:04 pm

What if I cant upload it to any of those sites? Do I have too? If so do I need any type of account?

Thanks. ^_^ I just dowloaded the new version like... an hour ago. :P Still trying to figure it out completely but I have a simple one done lol.
Arani

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 4029
Joined: June 30th, 2010, 8:39 am
Pride Points: 56

Re: How do I put my Gimp Avatars on the site?

Postby FlipMode » January 1st, 2011, 1:15 pm

Use tinypic.com you do not need an account there, you just upload and then click view raw image, then you copy the URL of the raw image and put it between IMG tags. At least that is what I do.
FlipMode
User avatar

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 8979
Joined: March 30th, 2010, 9:35 pm
Gender: Male
Pride Points: 266

Re: How do I put my Gimp Avatars on the site?

Postby Arani » January 1st, 2011, 1:20 pm

Alright, thank you much! I'm still trying to figure out how to work gimp... got it an hour ago and I'm already frustrated. :P I'll figure it out i think. xD Thanks again!\

edit: I don't see a veiw raw image button. Where would I find it?
Last edited by Arani on January 1st, 2011, 1:30 pm, edited 1 time in total.
Arani

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 4029
Joined: June 30th, 2010, 8:39 am
Pride Points: 56

Re: How do I put my Gimp Avatars on the site?

Postby FlipMode » January 1st, 2011, 1:29 pm

Oh are you just starting to use it? I hated it at first too haha but eventually I figured it out enough and actually I made some tutorials for it that you may or may not find useful which can be found here I have not updated that thread for a short while because I got kind of sick of making them and have not wanted to do more yet and also laziness and such things. But I try to update it sometimes.
FlipMode
User avatar

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 8979
Joined: March 30th, 2010, 9:35 pm
Gender: Male
Pride Points: 266

Re: How do I put my Gimp Avatars on the site?

Postby Arani » January 1st, 2011, 1:39 pm

Okay, thanks a mill. man! Again, dont see a raw image button. Where would I find it?
Arani

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 4029
Joined: June 30th, 2010, 8:39 am
Pride Points: 56

Re: How do I put my Gimp Avatars on the site?

Postby FlipMode » January 1st, 2011, 2:04 pm

Once it is uploaded click view full size image,then click on the picture and it will pop up in a box, then click raw image :)
FlipMode
User avatar

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 8979
Joined: March 30th, 2010, 9:35 pm
Gender: Male
Pride Points: 266

Re: How do I put my Gimp Avatars on the site?

Postby Arani » January 1st, 2011, 2:27 pm

Oh, okay, thanks! :)

I've almost got a siggy done... it isn't very good but it's a start! :P
Arani

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 4029
Joined: June 30th, 2010, 8:39 am
Pride Points: 56

Re: How do I put my Gimp Avatars on the site?

Postby xLilacVixenx » January 1st, 2011, 9:57 pm

You can also just upload it straight from your computer by going to User Control Panel > Profile > Avatar and just click "Browse" and upload it from your computer without a host. (:
Image
'Cause you're beautiful. Like no other. Flawless, absolutely flawless.
<3
xLilacVixenx
ƒℓυттєяsнγ ƒαиαтìc

User avatar

Years of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membershipYears of membership

Posts: 2327
Joined: October 16th, 2010, 7:24 am
Gender: Female
Pride Points: 13

Next

Return to Feedback & How-To

Who is online

Users browsing this forum: No registered users and 46 guests