PM issue (What do?)

Hi! Welcome to the Feedback forum.
Before reading anything or asking anything; please check out the FAQs. Your question might be in there. However if you want a better understanding after reading the FAQs, like if it didn't explain it good enough, then you may ask your question.

Please read the following before posting anywhere in this forum...

In this forum you will see an Announcement, and several "sticky" topics. The announcement is the Universal Board Rules. If you are new, read this before doing anything else. The sticky topics will stay above and separated from normal user-made topics in the forum. This is because they outline important information about the board. If you see a sticky topic concerning your issue, please reply with your question or concern in the correct topic. Moderators will see your reply within these topics. Before asking your question, be sure to read the topic and it's first page especially. It contains information about your issue that is valuable and may even answer your questions. If the topic does not answer your question, ask your question within the topic, not the forum. If no sticky topic concerns your issue, then you are welcome to ask your own questions by creating a new topic within the forum.

Thank you for keeping the Board Help forum organized!

PM issue (What do?)

Postby Flip_FTW » June 26th, 2012, 1:19 am

Hi.
So I was messing around in the UCP a few months ago, and.... I had accidentally "Allow people to send you PM" set to "No". And someone told me to set it back to yes, so I did... Or thought I did. And also sent a PM to that person telling them I had set it back to yes, that whole time it was set to no still. Basically for about three months, I thought I had it set to yes but it was still set to no. So I do apologise if anyone tried to send me one - its nothing personal, I just do not like you is all.

But what I want to know is, is it at all possible to retroactively get the PMs that were sent to me while it was set to no? I didnt mean to set it no, nor did I even realise I did -_-. I highly doubt anyone sent me anything, let alone anything important, cause you know... Forever a scone... But just wandered.

FTR - IF someone managed to divide by zero, and as a result somebody sent me a PM and was told they couldn't, I have double checked it this time - its definitely set to "Yes" now lol
Image
Image
Deep into that darkness peering, long I stood there wondering, fearing,
Doubting, dreaming dreams no mortal ever dared to dream before.
Flip_FTW
User avatar

Years of membershipYears of membershipYears of membershipYears of membership

Posts: 6988
Joined: March 30th, 2010, 9:35 pm
Location: UK
Pride Points: 214

Re: PM issue (What do?)

Postby SnowyCheetah » June 26th, 2012, 2:20 am

FlipMode wrote:So I do apologise if anyone tried to send me one - its nothing personal, I just do not like you is all.


Why must you sugarcoat things so, Flip?
Image


Like a good neighbor, State Farm is there!
SnowyCheetah
Heisenberg

User avatar

Years of membershipYears of membershipYears of membershipYears of membershipYears of membership

...I won.

Posts: 3481
Joined: August 21st, 2009, 11:47 pm
Location: USA
Nickname(s): Snowy, Snow, Sno, SC, SS, Snowball, Stormy
Pride Points: 24

Re: PM issue (What do?)

Postby Regulus » June 26th, 2012, 4:22 am

A few weeks ago, there wasn't a PM button on your profile. I see one now. It is working then, is it not?
Regulus
User avatar

Years of membershipYears of membershipYears of membership

Posts: 10113
Joined: September 29th, 2011, 1:19 am
Location: Hurr Durr Murika Land
Nickname(s): Reg, Regs, Last Person to Post
Pride Points: 158

Re: PM issue (What do?)

Postby Flip_FTW » June 26th, 2012, 9:02 am

StormySeethe wrote:
FlipMode wrote:So I do apologise if anyone tried to send me one - its nothing personal, I just do not like you is all.


Why must you sugarcoat things so, Flip?


Cause I can? Badassoverhere.JPG

Lol and yeah it's working now but.... Ahhh I seeeeeeeee. I thought that people could still pm me before and that if I switched back to yes all those PM that were blocked would come through in one load.

Never mind, I KNOW WHAT I AM TALKING ABOUT OK!
But this thread can be locked now I guess :P come on Regulus, you know you want to push that button. :)
Image
Image
Deep into that darkness peering, long I stood there wondering, fearing,
Doubting, dreaming dreams no mortal ever dared to dream before.
Flip_FTW
User avatar

Years of membershipYears of membershipYears of membershipYears of membership

Posts: 6988
Joined: March 30th, 2010, 9:35 pm
Location: UK
Pride Points: 214

Re: PM issue (What do?)

Postby Amy » June 26th, 2012, 7:00 pm

FlipMode wrote:And someone told me to set it back to yes, so I did... Or thought I did. And also sent a PM to that person telling them I had set it back to yes, that whole time it was set to no still


I was that person :3 ! Yay. But lol, glad to know it's back to normal. I got a message and it said you had deleted it or something, I dunno.
Image
It's a long way to Tipperary
To the sweetest girl I know!
Goodbye Piccadilly,
Farewell Leicester Square!
It's a long long way to Tipperary,
But my heart's right there.

My Graphic Thread
Amy
Aspiring Author

User avatar

Years of membershipYears of membershipYears of membership

What is a weekend?

Posts: 8570
Joined: December 22nd, 2010, 1:44 pm
Location: The land of dragons and daffodils
Nickname(s): Am, AJ
Pride Points: 121

Re: PM issue (What do?)

Postby Regulus » June 26th, 2012, 7:52 pm

Locked by request. :nehneh:
Regulus
User avatar

Years of membershipYears of membershipYears of membership

Posts: 10113
Joined: September 29th, 2011, 1:19 am
Location: Hurr Durr Murika Land
Nickname(s): Reg, Regs, Last Person to Post
Pride Points: 158


Return to Feedback & How-To

Who is online

Users browsing this forum: No registered users and 2 guests